all paintwork will be thoroughly checked for any loose of flaky paint. It will be scraped and sanded back to sound surface.
Wash down: all the surfaces to be painted (if required) will be given a through wash down with solution, to remove dirt, fungi and mould.
Patching: hairline cracks and cracks less than 2mm are to be filled with flexible silicon material. Cracks greater than 2mm wide are to be patched with exterior-grade (Sweden super filler) to match the existing texture.
Sanding: all surfaces will be lightly sanded before any paint is applied. Most paint adhesion problems are a result of poor preparation, mainly a lack of sanding.
Priming: all patched and all mould damaged areas will be
primed with oil-based sealer to seal the surface. Oil sealer are preferred as
they penetrate and seal the surface and provide superior protection to walls.
